Water Hoses
Tothose rubber water hoses for transfer, irrigation, dewatering and wash-down — textile discharge and wire-helix suction builds in multiple pressure tiers.
Technical Data
| Bore | Approx. DN10 – DN200 (⅜" to 8") |
|---|---|
| Working pressure | Common tiers around 6, 10 and 16 bar, up to approximately 20 bar; suction types rated for full vacuum |
| Temperature | −10 °C to +60 °C (water service) |
| Reinforcement | Textile (discharge) or steel wire helix (suction) |
| Media | Fresh, raw, process and waste water; weak solutions |
| Ends | Plain, cuffed, camlock, threaded or flanged couplings |
| Water discharge hose | Synthetic textile plies |
| Water suction & discharge hose | Steel wire helix + textile |
Selection Guide
Textile-reinforced delivery hose in 6 / 10 / 16 bar tiers.
Best forSite & plant deliverySteel wire helix + textile — full vacuum on suction, pressure on return.
Best forPump suction linesCut to length with camlock, threaded or flanged ends fitted and tested.
Best forReady-to-run assembliesDatasheet & Drawings
Hose assemblies are built to your length and end fittings — a certified approval drawing comes with your quotation.
EN 10204 3.1 material certificates are supplied with your shipment.
Also in This Range
Frequently Asked Questions
What is a rubber water hose used for?
A rubber water hose transfers fresh, raw, process or waste water for irrigation, construction dewatering, tank filling and wash-down. It is a general industrial and agricultural transfer hose, not certified potable-water tubing or fire hose.
What is the difference between a water discharge hose and a suction hose?
A discharge hose is textile-reinforced to hold internal pressure on the delivery side of a pump. A suction hose has an embedded steel wire helix so it resists vacuum and will not collapse when the pump draws water through it.
What pressure can a TOTFLEX water hose handle?
Water hoses are offered in tiers, commonly around 6, 10 and 16 bar and up to roughly 20 bar for heavy-duty types. TOTFLEX confirms the working pressure for your bore and duty before supply.
Can a water hose be used for suction and delivery on the same pump?
Yes — a wire-helix suction and discharge hose handles both the inlet vacuum and the delivery pressure, which is why it is the usual choice for portable and dewatering pumps.
What temperature range is a rubber water hose rated for?
Standard water hoses operate from about −25 °C to +70 °C. For hot water and steam, use a TOTFLEX steam hose instead.
Engineered to order. Delivered worldwide.
Send your duty conditions — size, pressure, temperature, medium and connections — and our engineers return a drawing, material selection and lead time.
Request a quote