Abrasive Hoses
Sandblast and dry-bulk hoses with a thick, static-conductive natural-rubber wear tube — engineered to survive grit, shot and aggregate that destroy ordinary hose.
Technical Data
| Bore | Approx. DN13 – DN100 (½" to 4") for blast; larger for material handling |
|---|---|
| Working pressure | 40 bar working pressure, 120 bar minimum burst, across the size range |
| Temperature | −20 °C to +80 °C |
| Tube | Thick, static-conductive natural rubber (NR) |
| Reinforcement | Textile plies (blast) or steel wire helix (handling/suction) |
| Media | Blast grit, sand, shot, gravel, aggregate, cement and dry powders |
| Sandblast hose (2-ply) | Textile, NR tube |
| Sandblast hose (4-ply) | Heavier textile, thick NR tube |
Selection Guide
Textile-reinforced blast hose with thick NR tube — the standard build.
Best forGeneral blastingHeavier carcass for higher pressures and rough handling.
Best forHeavy blast dutySteel-helix suction builds for aggregate, cement and dry powders.
Best forBulk transfer linesDatasheet & Drawings
Hose assemblies are built to your length and end fittings — a certified approval drawing comes with your quotation.
EN 10204 3.1 material certificates are supplied with your shipment.
Also in This Range
Frequently Asked Questions
What is an abrasive hose used for?
An abrasive hose carries abrasive solids — blast grit, sand, shot, gravel, aggregate, cement and dry powders — without eroding quickly. It is used for sandblasting, shot-blast cleaning and dry-bulk material handling.
Why are sandblast hoses made from natural rubber?
Natural rubber (NR) has exceptional resilience and abrasion resistance, so a thick NR tube wears away slowly under the constant scouring of blast media, giving the hose a long, predictable service life.
What does a static-conductive abrasive hose do?
Fast-moving dry, abrasive particles generate static electricity. A static-conductive tube and cover let that charge dissipate safely to earth through the couplings, reducing the risk of a static discharge during blasting or bulk transfer.
What is the difference between 2-ply and 4-ply sandblast hose?
A 2-ply hose is lighter and more flexible, suited to portable blasting and tight access. A 4-ply hose has more reinforcement and a heavier wall for maximum wear life in continuous, heavy blasting.
Can an abrasive hose be used for suction?
Yes — material-handling and dry-bulk types include an embedded steel wire helix so they resist vacuum and crushing, letting them both suck and discharge granular media.
Engineered to order. Delivered worldwide.
Send your duty conditions — size, pressure, temperature, medium and connections — and our engineers return a drawing, material selection and lead time.
Request a quote